Model
Polycom SoundStation 2W
Polycom SoundStation 2W EX (expandable)
Console
Size (L x W x H)
14.5 x 12.25 x 2.5 in
(36.8 x 31.1 x 6.4 cm)
Weight
1.90 lb. (0.86 kg) (without battery)
Power
12VDC nominal; supplied by battery or portable
AC charger
Portable charger power supply size & weight
2.2 x 2.85 x 1.85”
Weight 1.0 lbs (0.45 kg)
Wireless Capability
Wireless protocol – 2.4 GHz WDCT or 1.9
GHz DECT
Digital Spread Spectrum with Frequency Hopping
Signal range – 150 feet from base station
Dual diversity antennas
Battery – Rechargeable Lithium-Ion battery
pack
Talk time – 12 hrs. (Basic Version), 24
hrs. (EX Version)
Standby time – Up to 80 hrs. (Basic Version),
160 hrs. (EX Version)
Charge time –4 hrs. (Basic Version), 8 hrs.
(EX version)
Signal strength and battery status continuously
displayed on LCD
Portable console charger – 1 Amp standard
240V power supply
Security
64 bit voice encryption between console and base
station
Aux out record feature activated via console keypad
Cell phone connection
Four foot cable with standard 2.5mm headset plugs
Display
High resolution backlit graphical LCD
Caller ID and
phone book
Support for multiple Caller ID standards
Bellcore type 1 (requires a telephone company
subscription for activation)
ETSI
DTMF
British Telecom
Phone book/speed dial list – up to 25 entries
Keypad
12-key telephone keypad
On-hook/off-hook, conference, mute, volume up/down
keys, menu, navigation keys
3 context sensitive soft keys including redial,
hold, programmable conference key
Console loudspeaker
Frequency response: 300 to 3300 Hz
Volume: adjustable to 94 dBA SPL (peak) volume
at 1.0 meters
Console microphones
3 cardioid microphones 300 to 3500 Hz
Audio
Polycom Acoustic Clarity full duplex – IEEE
1329 Type 1 @ -2dB idle limit
Up to 10 ft. microphone pick-up range
Gated microphones with intelligent microphone
mixing
Dynamic noise reduction
Console interfaces
2.4 GHz WDCT or 1.9 GHz DECT radio interface to
base station
2.5 mm headset jack for cell phone connection
(cable included) |
 |
Interface
to charger
Mini-USB port for software upgrades
2 EX microphone connections (EX version only)
Console locking grommet (compatible with standard
laptop/PC security cables)
Wall mounting fastening holes
Base Station
Size (L x W x H)
5.9” x 5.9 x 1.6 in
(15.07 x 15.07 x 4.1 cm)
Wall mountable
Weight
0.7 lb. (0.32kg)
User interface
Power LED
Call in progress LED
Console Locating Button with audible console feedback
Power
Power: 110-240V, 50/60 Hz (power supply included)
Base station
power supply size & weight
1.9 x 2.4 x 1.65”
Weight – 0.55 lbs (0.25 kg)
Base station
audio auxiliary output
Style: RCA jack
Output activated from console menu to ensure privacy
Base station
telco interface
Network connection: 2-wire RJ-11 analog PBX or
PSTN interface
Speech mode
Bandwidth 300 Hz to 3.3 kHz
Network requirements: compatible with standard
PSTN and PBX networks, analog or G.711 encoded
Accessories
2 cardioid extension microphones 300 – 3500
Hz (for EX version only, wired mics)
4-Cell battery pack with 24 hour talk time
2-Cell battery pack with 12 hour talk time
Replacement portable console charger
Replacement cell phone connector cable
Regulatory compliance
UL/C-UL
ICES-003
FCC Part 15.247
FCC Part 68
CE Mark (R and TTE Directive)
A-Tick and C-Tick Marks
Environmental
requirements
Operating temperature: 40° - 104°F (5°
- 40°C)
Relative humidity: 20% - 85% (non condensing)
Storage temperature: -22° - 131°F (-30°
- 55°C)
Recommended
room conditions
Reverberation time: <0.54 seconds
Noise level: <48 dBa
Approx room size: 10x20
SoundStation2W
ships with
Tabletop phone console with integrated display
and keypad
Compact base station
Rechargeable Li-Ion battery pack
Portable console charger
4 ft. cell phone connection link
Base station power cable
1 7-ft. (2.1m) base station telco cable
User documentation (user guide CD, quick installation
guide, registration card)
Warranty
12 months |