VideoCentric
The Video Over IP Company   
 
 









 






Home  | Products  | Services  | Support  | Resources  | Applications  | Company  | Contact
 
 

 

Please click on the image for product information

   

Jargon Buster

ANSI lumens
Brightness is measured in ANSI (American National Standards Institute) lumens: the brighter the projector, the higher the ANSI lumen rating.
Aspect Ratio
Aspect ratio is the ratio of the width of an image to its height. The most popular aspect ratios are 4:3 (4 by 3) and 16:9 (widescreen).
Component Video
Component Video is a method of delivering quality video (RGB) in a format that contains all the components of the original image. These components are referred to as luma and chroma and are defined as Y'Pb'Pr' for analogue component and Y'Cb'Cr' for digital component.
Composite Video Signal
The combined picture signal, including vertical and horizontal blanking and synchronizing signals.
Contrast Ratio
The ratio between white and black. The larger the contrast ratio the greater the ability of a projector to show subtle colour details and tolerate room light.
Digital Light Processing (DLP)
A commercial term from Texas Instruments (TI) otherwise referred to as DMD. It works by the alignment of thousands of tiny mirrors, lined up in 800 rows of 600 mirrors each. Each micro mirror is hinged and motorised with electrostatic energy allowing them to be tilted at incredible speeds, modulating the light from a lamp so it can be sent through a lens, on to the screen.
DVI
Digital Visual Interface between digital devices such as projectors, flat screens, video conferencing systems and PCs.
DVI-I
A connector that has the capability of carrying either digital or analog video signals. This connector can be converted to the common 15-pin VGA connector with a DVI-I to VGA adapter making the input compatible with standard VGA cables.
DVI-D
A connector that has the capability of carrying digital video signals. This connector is very similar in appearance to the DVI-I connector but lacks the ability to carry analog video signals.
Eco Mode
An option that increases lamp life by lowering lamp power. When this feature is engaged, the projector's brightness level will be reduced by approximately 20%.
Focal Length
The distance from the surface of a lens to its focal point.
Keystone Correction
This takes a trapezium-shaped image caused by mounting a projector at an angle, and makes it into rectangular one for alignment with screen.
LCD
Liquid Crystal Display technology. It is used in flats screens and projectors to present a digital image for viewing.
Native Resolution
Native Resolution refers to the number of physical pixels in a display device. For example, an SVGA projector has 800 physical pixels of resolution horizontally and 600 pixels vertically or 480,000 total pixels. This is the native resolution of the projector. Projectors are capable of projecting greater or smaller resolution images into the same physical resolution through scaling.
NTSC
The United States broadcast standard for video and broadcasting. Lower resolution than PAL systems used in most of the world.
PC-Less Presentation
Projector accepts a standard PCMCIA memory card and can play back a saved PowerPoint® presentation without a computer.
Progressive Scan
A type of display in which all the horizontal lines of an image are displayed at one time in a single frame, unlike an Interlaced Scan in which a frame consists of two separate fields with the first field consisting of odd horizontal lines and the second field even horizontal lines.
Rear Screen Projection
Using an opaque screen, the projector is placed behind the screen, invisible to the audience. It projects onto the screen and the audience sees it on the other side eliminating shadows from the presenter. Ideally a projector with a short throw lens is used to minimise wasted space behind the screen.
Resolution
The amount of pixels that make up an image - e.g. 640 x 480 means 640 pixel groups across the image by 480 pixel groups down. The larger the number of pixels the higher the resolution and the sharper and more detailed the image is. Common resolutions are VGA, SVGA, XGA, SXGA, UXGA these represent increasing levels of resolution. The 'W' prefix (eg. WXGA) refers to the resolution appropriate to displaying in wide-screen aspect ratio.
RGB
Red, Green, Blue; the normal type of monitor used with computers. Example of usage: RGB input or output often referred to as Computer input or output.
S-Video
A video transmission standard that uses a 4 pin mini-DIN connector to send video information on two signal wires called luminance (brightness,Y) and chrominance (colour, C). S-Video is sometimes referred to as Y/C. Unlike a composite signal found on a phono/RCA connection where the Y and C information is combined into one signal, S-Video has its luminance and chrominance separated meaning that a comb filter (which can reduce the sharpness of the image) is not needed inside the projector.
SVGA
800 horizontal pixels by 600 vertical pixels giving a total of 480,000 individual pixels on screen.
SXGA
1,280 horizontal pixels by 1,024 vertical pixels giving a total display resolution of 1,310,720 pixels.
Throw Ratio
A ratio between projection distance and width of image. For example, a throw ratio of 1.8:1 means that the projector must be 18' away from the screen to result in a 10' wide image.
UXGA
1,600 horizontal pixels by 1,200 vertical pixels giving a total display resolution of 1,920,000 pixels.
VGA
640 horizontal pixels by 480 vertical pixels giving a total display resolution of 307,200 pixels.
WiFi
Wireless Fidelity and is based on the IEEE 802.11 specifications for wireless local area networks (WLAN). There are four specifications in the family: 802.11, 802.11a, 802.11b, and 802.11g. All four use the Ethernet protocol.
Zoom Range
The ratio between the smallest and largest image size by adjusting only the projector's zoom lens.

 

 

 
 
 
 

Copyright© 2009 VideoCentric Ltd.
Registered in England No. 4296589
Terms & Conditions
E&OE
Site Map