London :   
Product Locator :   
 Home>Accessories>Projectors>Sony VPL-FX40
projector left menu


Sales
0118 9740125





Sony VPL-FX40
 

Sony VPL-FX 40

Sony VPL-CX21
Authorised Reseller
 
Sony VPL-FX40 XGA Projector 4000 ANSI Lumens
 
Choose an option.....
 
 
Features - Sony VPL-FX40
 
  • *Networking Presentations
    When the VPL-FX40 projector is installed on a LAN via RJ45, presentations can be projected from any PC on that network whether connected via a LAN cable or wirelessly. In addition, an innovative new feature - High-Speed Image Transfer over IP Networks means that because the VPL-FX40 projector employs efficient compression and transmission techniques, it can receive and project images via IP networks for effective presentations from any networked PC

  • Monitor Out
    The VPL-FX40 projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.

  • Low Fan Noise
    For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-PX40 is 28dB in low mode which is considered less than a whisper.

  • RS-232C
    Connections include an RS-232C port for control of the projector.

  • Password Protection
    When this function is activated a password is required to use the projector (if the password is lost, Sony is able to retrieve it).

  • Control Panel Lock
    This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

  • Centered Lens Design
    This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

  • Off and Go
    No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-FX40 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.

  • Direct On / Off
    Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-FX40 can be set to skip the standby mode, so that it can be turned on / off directly using a main switch.

  • Power Zoom/Focus/Picture Shift (Horizontal and Vertical)
    The Zoom, Focus, and Horizontal and Vertical Picture Shift functions available with the projector’s supplied power-operated lens and optional lenses (except VPLL-1008) can be controlled both from the projector control panel and the supplied Remote Commander™ unit. Images can be easily adjusted to the desired settings both during installation and when the projector is in use

  • ID Function for Multi-Projector Installation
    Multiple Projectors, one Remote Commander! The VPL-FX40 projectors have a built-in ID function, so each projector can be controlled independently from a single Remote Commander unit.

  • ECO INFO
    Halogenated flame retardants are not used in cabinets or printed wiring boards. Corrugated cardboard is used for the packaging cushions. Standby power consumption: 0.5 W.
 
 
Technical Specifications -Sony VPL-FX40
 

Model
Sony VPL-FX40

Optical

Projection system
3 LCD panels, 1 lens projection system

LCD panel
0.79-inch XGA panel, 2,359,296 (1024 x 768 x 3) pixels

Projection lens
1.3 times power zoom lens, f30.6 to 39.7 mm, F1.66 to 2.18

Lamp
275W ultra high pressure Lamp

Screen coverage
40 to 600 inches

Light output
4000 ANSI lumens (lamp mode high) , 3200 ANSI lumens (lamp mode standard)

Signals

Color system
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 (automatically/manually selected)

Resolution
Video : 750 TV lines, RGB : 1024 x 768 pixels

Acceptable computer signals
fH : 19 to 92KHz, fV : 48 to 92Hz (Up to UXGA (fV 60Hz))

Acceptable video signals
15k RGB 50/60Hz, Progressive Component 50/60Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p), Composite Video, Y/C Video

General

Dimensions (W x H x D)
532 x 145 x 352 mm, (21 x 5 3/4 x 13 7/8 inches)

Mass
Approx. 9.8 kg (21 lbs 10 oz)

Power requirements
AC 100 to 240 V, 4.1-1.7 A, 50/60 Hz

Power consumption
Max. 400 W, Standby 15 W, Standby (low) 0.5 W

Heat dissipation
1365 BTU

Operating temperature
0 to 35 °C (32 to 95 °F)

Operating humidity
35 to 85% (no condensation)

Storage temperature
-20 to 60 °C (-4 to 140 °F)

Storage humidity
10 to 90%

Speakers

Speakers
1.8 W x 2 (Stereo)

Inputs/Outputs

Video In
Video Composite Video (RCA phono jack) S Video Y/C Mini DIN 4-pin Audio Stereo (RCA phono jack x2)

Input A
Analog RGB HD D-sub 15-pin (female) Audio Stereo mini jack

Input B
Analog RGB HD D-sub 15-pin (female) Audio Stereo mini jack

Input C
Analog RGB/component BNC x5 (female) Audio Stereo mini jack

Input D
Digital RGB/Audio HDMI (HDCP)

Input E
Network RJ45: 100BASE-TX/10BASE-T

Output
Monitor out HD D-sub 15pin Audio Stereo mini jack (variable out)

Remote
RS-232C: D-sub 9 pin (female)

Control S IN
Stereo mini jack (plug-in-power)

Supplied Accessories

Warranty Card

Security Label

Safety Regulations

Quick Reference Manual

Operating Instructions and Application Software (CD-ROM)

AC power cord

Lens cap

Size AA (R6) batteries

Remote Commander Unit


 
   
 
 

Sanyo projectors uk
Quick Links

Copyright © 2008 VideoCentric Ltd.
UK VideoConferencing Equipment & Solutions
Registered in England No. 4296589
Terms & Conditions
E&OE
RKG
PRC


Last modified:Thursday, 06-Dec-2007 12:16:20 GMT