| EVI-D100/D100P
PTZ Camera Control Software |
The EVI-D100 Camera can
be controlled through the VISCA input on the rear of the
camera. VISCA is an RS-232 protocol. A cable (CAB90038)
is available from VideoCentric Ltd which will connect
between a PC/Laptop COM1 (9 pin serial) port and the EVI-D100
camera.
Please note, this software
only CONTROLS the camera. To get video into the PC you
must have a video capture card or USB capture device. |
|
| EVI-D31/D30
PTZ Camera Control Software |
The EVI-D31 Camera can
be controlled through the VISCA input on the rear of the
camera. VISCA is an RS-232 protocol. A cable (CAB90038)
is available from VideoCentric Ltd which will connect
between a PC/Laptop COM1 (9 pin serial) port and the EVI-D31
camera.
Please note, this software
only CONTROLS the camera. To get video into the PC you
must have a video capture card or USB capture device. |
|
| EVI-D70/D70P
PTZ Camera Control Software |
The EVI-D70 Camera can
be controlled through the VISCA input on the rear of the
camera. VISCA is an RS-232 protocol. A cable (CAB90038)
is available from VideoCentric Ltd which will connect
between a PC/Laptop COM1 (9 pin serial) port and the EVI-D70
camera.
Please note, this software
only CONTROLS the camera. To get video into the PC you
must have a video capture card or USB capture device. |
|
